|
|
Steam boiler for straw 10t/h, 320°C
Truhlář, Marek ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is design a grate steam boiler for burning straw with an output of 10 tons of steam per hour. The produceds team has parameters 320 °C, 3,2 MPa. For a given fuel (fytomass) is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of steam and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.
|
|
|
Steam boiler for fytomass
Baláš, Jiří ; Ing. Obrovský (referee) ; Skála, Zdeněk (advisor)
The purpose of this Diploma Thesis was the construction design of the steam boiler for fytomass. For the specified parameters of biomass have been gradually implemented stoichiometric calculations of which are further based calculation of enthalpies of combustion gas. In the next part have been dealt with heat balance of the boiler, the efficiency of the boiler, recirculation of exhaust gases and the temperature of the combustion gases in outlet from fire. Thereinafter, the proposal of particular heat surfaces of steam boiler was solved, so that the resulting number and size correspond to the desired parameters. The parameters are temperature, pressure and the amount of steam.
|
|
|
Vliv stanoviště a agrotechniky na produkci fytomasy vybraného klonu topolu (Populus nigra L. X Populus maximowiczii Henry) pro energetické účely
NOVÁKOVÁ, Aneta
The thesis deals with theme of fast-growing species and with the impact of agricultural practices (like choice of location, care and possibility of fertilizers usage) which are the most important factors for successful cultivation of energy tree species. The introductory part of the thesis contains an explanation of the term biomass and its possible distribution by types and ways of obtaining the biomass. Following chapters deal with fast-growing tree species. The issues of cultivation are also described here in parts like basic characteristics, history of these energy species, legislative restrictions and procedure during founding of the plantation itself, selection and preparation of locality, the use of agricultural practices (cultivation, fertilization). The practical part deals with it´s own experiment with a clone of poplar J 105 (Populus nigra L. x Populus maximowiczii Henry). This clone of poplar was planted on four experimental plots. The growth depending on the conditions of habitat and selected agritechnical measures was observed in following years. There are descriptions of conditions on all localities, chosen ways of planting and aftercare about tree vegetation. Another experiment which contained adding different types of nitrogenous fertilizers was performed in the last period of observing. Results showed that the greatest impacts on the quality of the growth of fast-growing trees have properly chosen location and aftercare about tree vegetation, at least in the first vegetation period. Addition of fertilizer seemed as important only in case of planting on nutrient very poor sites.
|
|
|
Steam boiler for straw 10t/h, 320°C
Truhlář, Marek ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is design a grate steam boiler for burning straw with an output of 10 tons of steam per hour. The produceds team has parameters 320 °C, 3,2 MPa. For a given fuel (fytomass) is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of steam and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.
|
|
|
Steam boiler for fytomass
Baláš, Jiří ; Ing. Obrovský (referee) ; Skála, Zdeněk (advisor)
The purpose of this Diploma Thesis was the construction design of the steam boiler for fytomass. For the specified parameters of biomass have been gradually implemented stoichiometric calculations of which are further based calculation of enthalpies of combustion gas. In the next part have been dealt with heat balance of the boiler, the efficiency of the boiler, recirculation of exhaust gases and the temperature of the combustion gases in outlet from fire. Thereinafter, the proposal of particular heat surfaces of steam boiler was solved, so that the resulting number and size correspond to the desired parameters. The parameters are temperature, pressure and the amount of steam.
|
|
|
Assessment of use of graminoid stands for biogas production
RYCHTEROVÁ, Jana
The MSc. Thesis is part of project No. 2B06131 of the National Research Programme of the Czech Republic. The aim of the work was to assess selected herbaceous stands in repsct to their use for biogas production. A working hypothesis was set as follows: The biogas production per unit organic matter does not differ between biomass coming from different types of grasslands/biotopes. The results support the hypothesis. The sites studied were located in altitudes from 400 to 800 m a.s.l., water availavility ranged from mesexerophytic to hydrophytic conditions and nutrient availability ranged from mesooligotrophic to eutrophic conditions. According to plant species composition, the stands corresponded to stand types Alopecuretum pratense, Phalaridetum, Poetum pratense, Arrhenatheretum elatioris, Festucetum pratense and the ruderal stand type. In spite of these differences, biogass production estimated according to ZIFO was very similar for all stands, i.e. in a range of 518 {--} 546 NL biogas per kg organic substances in dry matter and had almost identical methan content. The results indicate that, in assessment of suitability of herbaceous stands for biogass production, biomass production is of greater importance than plant species composition.
|
guest ::
